GWC Qatar Careers 2023 Apply For Technician – HVAC Jobs In Doha

• To perform Preventive Maintenance and attend corrective maintenance call for building HVAC system
• Daily monitoring and inspection for Package, Split, window ACs, cold chambers, skid units, plant rooms, etc.. in W / houses, offices, accommodations,  substations, plant rooms, etc…
• Responsible for reporting any problems/malfunctions on an as need basis.
• Comply with all internal policies and Occupational Safety and Health Administrative (OSHA) rules while working.
• Must have at least 4-5-years hands-on experience in the field of HVAC maintenances.

Knowledge, Skills and Abilities:

• Experience in working with HVAC system such as Dx-Air cooled system, Package AC and Split AC
• Capable of operating above units.
• Must have sound knowledge electrical and control side related HVAC systems.
• Understand and be able to read blueprints and wiring diagrams.
• Must be well verse in fault finding and corrective measure arise during operation failures.
• Must have knowledge of building firefighting and smoke detection interlock
• Able to work independently and lead team with minimal supervision
• Possess good communication skills and the ability to manage multiple tasks efficiently and work productively in a fast-paced, team-oriented environment.

Job Requirement

Graduated or diploma holder or technical certification in HVAC.

3 to 4 years of related experience.

• To assist driver in all phases of delivery operation.

Roles and Responsibilities:

• Help and assist the Driver Assembler load and offload the furniture to the customer’s place
• Help and assist the Driver Assembler in assembling and installing the furniture’s
• Assist in set-up of furniture in the customer’s home.
• Ensure to collect all assembly tools before leaving the customer’s place
• Collect and remove all empty cartons and other left-over materials from the customer’s place and keep them inside the trucks cabin.
• Ensure to throw all empty cartons and other left-over materials at the designated waste skips.

Minimum Qualifications:

• High School graduation

Minimum Experience:

• Must have 2 to 4 years of experience in Furniture Assembling.
• Heavy lifting required – up to 20 kg. May be required to carry heavy merchandise upstairs.

• The job holder should be able to remove the rough spot on vehicle panels and sand surface using hand or power tools, carries out masking procedures; color match and mixes paints; apply primer and finishing coats, and polish and waxes, and finish paintwork.

Job Responsibilities:

• The job holder should read repair requests and inspect the condition of vehicles.
• The job holder should sand repaired body surface using hand & power tools, spot fill, and prime.
• The job holder should mask and tape for multi-tone paintwork and protective requirements,
• The job holder should prepare to paint both equipments & apply or restore anti-corrosion treatments.
• The job holder should mix paint and components and match the colors.
• The job holder should use the equipment, brush or spray guns to apply prime, enamel, lacquer, or other non-metallic protective and decorative coatings to automobiles.
• The job holder should dry or bake newly painted surfaces and apply decades, transfers, stencils & other types of identification to finish paintwork.
• The job holder should refinish galvanized outer panels and anodized aluminum moldings and inspect job and repair faults.
• The job holder must work indoors with noise environmental conditions that can be dusty & dirty with exposure to exhaust fumes, dust particles, chemicals & solvents. He should be tolerated with this by complying with all the safety policies & regulations.
• He should have the energy to stand for long periods, bend, stoop, crouch, reach & kneel and he shouldn’t be bothered or affected by paint or other odors. The job holder would be closely supervised by the fleet supervisor.

Job Requirement:

• The job holder must have wide knowledge & skills in auto spray paintings & work experience of 3 – 5 years in similar fields.
• The job holder must have good communication skills.
• He should be a team player.

The job holder should repair and maintain the light and heavy-duty trucks, following manuals and using hand tools, power tools, and knowledge of electrical, power transmission, brake, and other automotive systems. The job holder is responsible for performing regular services and preventive maintenance for the trucks to keep them in good working condition.

Job Responsibilities:

Successful trips without breakdown. Reduced downtime for the trucks.

The job holder must have the ability to repair and maintain a wide range of trucks, troubleshooting ability, reading comprehension of work-related documents, installation ability, customer service, and sound judgment, and knowledge of workplace safety requirements and procedures.

The job holder must have the ability to operate the required tools in a safe and responsible manner.

Job Requirement

High School graduate or Vocational course

3 years experience in heavy vehicles (Mercedes, MAN Truck etc…)

Drive the vehicle in good manner. Deliver the items in right place and right time as per the customer’s requirements.

Roles and Responsibilities

• Drivers shall check the vehicle condition and do basic maintenance checkup.
• Take the advised from Supervisor In-charged or Transport Coordinator prior for trip operation.
• Shall coordinate with the customer’s or their owned representative from time to time on required parameters.
• Shall coordinate with the Transport Supervisor or Coordinator in the case arises.
• Load and deliver the items based on the customer’s requirements.
• Drivers shall seek customer’s signature from the Trip Tickets/Delivery notes that items had been delivered in good condition/manner.
• The same documents in items no. 6 shall be given to Transport Coordinator for proper billings.

Minimum Qualification

• High School or Equivalent.

Minimum Experience

• 3-5 years of experience in driving trailer truck.
• Must have valid Qatar driver’s license with trailer category.
• Must know the locations in Qatar

Responsible for assisting the Team Leader and/or RMS Supervisor in the completion of the jobs.

Responsibilities:

• Responsible for day to day transactions and operations of RMS
• To receive the query from the customers and to act upon it.
• To prepare daily transaction report
• Scoping and survey of proposed customers
• Meeting client prerequisites
• Job file preparation and submission
• Records Management system administration activities
• Preparing Inventory report
• Updating RMS application
• Onsite works execution

Job Requirements:

• Diploma or equivalent
• 2 years of experience in a related field

• RMS activities such as inventory, system update, etc.
• Preparing Reports.
• Be a team member of Project works
• Register updating & filing works
• Retrieving files in response to requests
• Destroying records at the end of their agreed retention period
• Managing the storage environment
• Assisting DMS/RMS Activities
• Assisting activities such as Scanning, QC, Indexing

Job Requirements:

• Diploma or equivalent.
• 1 year of experience in a related field.