DynCorp International FZ Qatar Careers 2022 Apply Now For Aircraft Servicer Jobs In Doha, Qatar

The Aircraft Servicer services aircraft, performing any combination of the following
tasks, directs incoming and outgoing aircraft near terminal or flight line parking area to assist
pilot’s maneuvering of the aircraft on ground, using hand or light signals or drives light truck
with guiding sign, and secures aircraft in parking position with aircraft wheel chocks, installs
landing gear and safing pins.

Principal Accountabilities
(Typical duties include the following, although specific duties vary by assignment or contract)
• Operates service vehicles to replenish water, waste system chemicals (at select locations)
• Assists with refueling, defueling and towing aircraft (tow vehicle operator).
• Operates ground support equipment such as electrical power carts, engine starting
carts, air conditioning carts, nitrogen carts, oil and hydraulic carts for serving aircraft.
• Examines tires for specified air pressure and condition.
• Positions boarding platforms to unload or load aircraft passengers (stair case truck).
• De-ice aircraft wings and assemblies (select locations)
• Extract engine oil samples when required and provide to NDI for analysis.
• Coordinates via land mobile radio with air traffic control for follow me and towing of
aircraft to designated parking spots.
• Retrieve Drag chutes and return to owning maintenance unit.
• Coordinates with base supply in ordering parts for aircraft.
• Perform other duties as assigned

Knowledge & Skills
• Ability to communicate effectively both orally and in writing
• Knowledge of safety and security regulations, practices, and procedures
• Additional knowledge/skill requirements may be required by assignment or contract

Experience & Education
• Federal Aviation Administration (FAA) airframe / Power plant license or DD 214 with
documentation reflecting aircraft maintenance experience.
• High school diploma or equivalent
• Additional experience/education may be required by assignment or contract
Physical Requirements/Working Environment
• Living and working conditions at assignment location could be remote and uncomfortable
• Long hours, exposure to weather, dust, and hazardous/harsh conditions
• Personnel should be aware of moving on short notice and under adverse condition

• Must be a US Citizen

Travel

• Ability to travel domestically and internationally

Minimum Requirements

Experience & Education
• Federal Aviation Administration (FAA) airframe / Power plant license or DD 214 with
documentation reflecting aircraft maintenance experience.
• High school diploma or equivalent
• Additional experience/education may be required by assignment or contract
Physical Requirements/Working Environment
• Living and working conditions at assignment location could be remote and
uncomfortable
• Long hours, exposure to weather, dust, and hazardous/harsh conditions
• Personnel should be aware of moving on short notice and under adverse condition

• Must be a US Citizen

Principal Accountabilities

• Inspects and accepts documentation (DD Form 1149/1348-1) for outbound cargo offered for shipment in the Defense Transportation System (DTS) for completeness, Transportation Account Code, accuracy, Hazardous/Classified, or ITAR certification.
• Processes, verifies Nomenclature, Hazard Class, and Quantity, and inspects outbound cargo offered for transportation.
• Properly classifies freight, selects commodity codes, selects most efficient mode of shipment, and controls obligations for government transportation funds.
• Inspects Hazardous Materials to ensure proper packaging, marking, labeling, documentation and certification in accordance with applicable Dangerous Goods Regulations (AFMAN24-204, 49Code Of Federal Regulation, International Maritime Dangerous Goods, etc).
• Selects and initiates contact with local carriers to arrange appropriate transport equipment for containers, classified, sensitive, hazardous, or out sized shipments based on the size, weight, commodity description, freight classification, required delivery date, priority, or other special requirements.
• Uses automated computer systems and programs to process and document all freight, (CMOS, GATES, IBS,).
• Prepares all required shipping documents for data input to CMOS/GATES, assigns Transportation Control Numbers, produces labels, issues truck manifest for general/hazardous cargo, Maintains Manifest logs.
• Accurately inputs the Transportation Control Numbers, Transportation Accounting Codes, consignor and consignee codes and other essential transportation data into the Cargo Movement and Operations System (CMOS) and or Global Acquisition and Transportation Execution System (GATES).
• Prepares Truck Shipping Documents for Line Haul Intertheater/Intratheater between sites, container movements from Sea Port of Embarkation to Sea Port of Debarkation, and local movements.
• Processes Export Traffic Release Requests (ETRR) for sealift shipments using Surface Deployment Distribution Command (SDDC) Integrated Booking System (IBS).
• Provides In-transit Visibility through the Global Transportation Network (GTN) and Radio Frequency Identification (RFID) servers, and Transportation Management Systems (TMS).
• Performs Port Handling and Inland Transportation (PHIT) duties as designated Work Monitor for Inbound and Outbound Line Haul Sub Contractor trucks. Inspects and documents each shipment for contract compliance on a Customer Service Survey form.
• Performs Host Country customs clearances and liaises with Military and Host country Ministries on Import and Export for Border Customs Clearances, Airport Customs Clearances, and Seaport Clearances.
• Inspects, accepts and inventories Inbound Air Cargo, Line Haul Trucks, and Containers.
• Inventories and inspects all incoming freight for damage prior to acceptance. Initiates and completes SF 361, Transportation Discrepancy Report (DISREP) as required.
• Prepares and handles cargo in accordance with all prescribed regulations, instructions, technical orders and procedures.
• Performs weighing of cargo, vehicles and outsized cargo to determine center of balance for rolling stock and
  ensures cargo dimensions within pallet and aircraft limitations.
• Maintains operational stock levels of all 463L assets.
• Loads/unloads all 463L pallets, 40 foot and 20 foot sea van commercial/military containers and 40 foot Flat
  bed/Low bed trucks.
• Inventories, documents and loads/unloads outbound/inbound freight as required. Assists in loading/unloading
  Military vessels at seaport.
• Processes passengers for air transportation, handle baggage, load/offload aircraft. Completes security checks of
  passengers and baggage.
• Operates MHE, wide body loaders, and cranes.
• Safely transports and handles explosives.
• Prioritizes and schedules work assignments of subordinate personnel.
• Implements, documents and controls quality, training, environment and safety programs.
• Maintains Technical Orders, publications, forms and files required for Traffic Management operations.
• Compiles data and submits reports and other correspondence as required.
• Performs other duties as assigned.

Minimum Requirements

• Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum Power Point, Excel and Word programs.
• Will be required to operate material handling equipment.
• Must possess as valid home country driver’s license and ability to obtain host nation driver’s license.
• High School diploma or equivalent required.
• Minimum of three years experience in Traffic Management (TMO)/Air Freight operations or Associate Degree in
  a related field of study required.
• Work experience in freight acceptance, preparation, processing, inspection, documentation and handling
  procedures is required.
• Must be able to successfully complete training to prepare, certify and/or inspect Hazardous Materials for Air
  Transportation IAW AFJMAN 24-204 upon selection.
• Experienced in palletizing cargo on single, multiple/married 463L pallets using side and top nets, straps, chains
  and devices for restraint. Experienced in aircraft cargo loading/unloading and cargo tie-down restraint procedures
  required.
• Must be eligible to obtain and maintain a T1/NACI  Clearance.
• Works in normal office and maintenance shop or warehouse environment and may be required to work outdoors
  for extended periods.
• Will be required to wear proper Personal Protective Equipment (PPE) according to prescribed procedures and as
  required for task being performed.
• Physically capable of performing all required duties; capable of lifting/pushing/pulling minimum of 50 lbs.
• Ability to travel domestically and internationally.
• Must have a current U.S. Passport.
• Must be a U.S. Citizen.

• Performs airfield inspections and checks for safety and compliance with planning and design criteria.
• Plans, organizes and directs airfield activities to include but not limited to airfield construction/repairs, airfield driving program, ice/snow removal operations, and Bird/Wildlife control.
• Procures, maintains, and produces information on safe operation of aircraft through the national and international airspace system such as Flight Information Publications, aeronautical charts and maps, NOTAM, local airfield and navigational aid status and weather information.
• Process domestic and international flight plans.
• Coordinates with bases agencies to meet aircrew requirements for billeting, messing, refueling, transportation, and transient aircraft maintenance.
• Regularly monitor and inspect operational condition of runways, taxiways, navigational and meteorological aids
• Coordinate with Operations and Maintenance Manager to ensure all facilities of airfield remain in operational conditions.
• Determine operational restrictions or hazards to flight and communication facility and advise airfield management; ensure implementation of Bird/Wildlife Aircraft Strike Hazard (BASH) program
• Identify flight safety issues including violations of airfield clearing criteria and hazards to arriving, departing, and parked aircraft; assess damage to airfield property; and monitor necessary actions to repair and reopen airfield facilities.
• Coordinate with military, federal, international, and local agencies concerning flight planning, training route utilization, flight movement messages, search/ rescue operations, and base contingency/operational plans.
• Advise military and civilian agencies on closure of runways, taxiways, aircraft parking aprons/spots, airfield repairs/construction, and availability of airfield lighting/navigational aid systems.
• Coordinate with airfield management regarding emergency situations on airfield.
• Coordinate with base agencies to ensure proper support to all base, transient VIP aircraft, passengers, and crews.
• Knowledge of applicable laws, regulations, instructions, and directives pertaining to airfield planning and design criteria, aircraft operations, and airfield management
• Knowledge of safety and security regulations, practices, and procedures
• Skill in analyzing, planning, and adjusting work operations to meet program requirements and objectives within available resources
• Effective oral and written communication skills
• Proficient in Microsoft Office software

Minimum Requirements

• Graduate of an approved DoD/Airfield Managers course or equivalent.
• Four (4) years of experience in airfield operations of similar scope and level of responsibility; to include the following: coordination between air-traffic control and maintaining personnel, dispatching, implementing airfield safety procedures; monitoring and maintaining flight records, and applying knowledge of weather information. Managing wildlife on and around airfield grounds. Implementing bird aircraft strike hazard procedures. Coordinating airfield maintenance and construction projects. Coordinating hazardous cargo and live fire devices.
• Experience as aircrew/dispatcher/flight follower with a 14 CFR Part 121 or 14 CFR Part 135 operator.
• Experience conducting airfield inspections in accordance with AFI 13-204v3 is required.
• Experience operating IAW AF113-204V1 Ch. 7.
• Must be able to maintain a Secret Clearance